Page 465 - JENZI2021EN
P. 465
463
B B
Belly Boat • 170elly Boat • elly Boat • 170
The special features such as protective edging, carrying-strap,
high-pressure flooring, or rear mount – distinguish the
JENZI Belly-Boat 170 from most conventional
Belly Boats on the market. Also the rod-holder,
mounts for fish finder and fish finder monitor
are standard included features. The 170 cm
length, the extra width of 116 cm, and the
diameter of 34 cm provide for a stable and
secure position in the water. The five air
compartments in the boat, floor, and seat,
as well as the screw open valve add the
needed security when angling.
An added security feature is the metal
stabilizer rod in which the catching straps
in the middle of the seat as well as the removable
net / compartment wherein a measuring tape is integrated.
The Belly-Boat is consctructed from strong tear-free
PVC rubber-raft material with a 0,7 mm thickness.
The boat has a load capacity of 150 kg, yet with plenty
of reserve to spare.
Added advantages that other conventional boats do not have are
the included attachable paddle as well as the special rear mount on
to which an electric motor may be attached. These make it possible to
move forward swiftly and with ease without the necessity of using
flippers. To prevent damage to the most sensitive areas of the boat, Features:
protective edging made from thick non-abrasive material has been • Length: 170 cm
attached to the outside and to the underside of the boat. The Belly Boat Accessories included: • Width: 116 cm
also has adequate storage space. Both on the left and on the ride side • Carry-case • Float Diameter: 34,5 cm
you will find spacious pockets that are securely closeable due to Velcro • Repair set • Load-capacity: approx. 160 kg
and security clips, and are removable for transport. To top this off, there • Pump • Air compartments: 3+2 (3 x in boat +
is an additional net hidden behind the seat as well as enough storage • Rod-holder 1 seat compartment + 1 x floor)
space for accessories and battery.
• Fish-finder mount • Weight: approx. 18 kg
• Fish-finder monitor mount • Material: PVC-material
• Rear mount for Electric motor (sturdy rubber-raft material)
• Carry-strap (for transporting • Material thickness: 0,7 mm
the Belly Boat like a back-pack) • Maximum air pressure float:
• 2 paddles 0,25 bar
• Net / compartment (1 x in front of • Maximum air pressure floor: 0,8 bar
seat + 1 x behind seat) • Air valve:
• 2 spacious pockets for accessories 5 security valves with caps
(2 x side) • 2 large pockets ( 2 x side)
8837 000 JENZI Belly Boat 170
Highlight: Boat may be transported as a back-pack. On the lower side of
the boat are 4 metal grommets onto which the enclosed carrying-strap may
be attached. This allows for the boat to be carried to the water with ease. Incl. fish-finder mointor mount Including rod holder Protected edges
Rear mount for electric motor High pressure floor
Carrying-strap Pump Repair-Set Carry case